Updated 06/23/98:

We hope to gradually fill this page with information about the performance of the 440BX chip set. Hopefully this information will be useful to you or at least interesting.

The 440BX is Intel's latest PCIset, replacing the 440LX and 440FX PCIsets. The 440BX has the following features:

Probably the most important features are the 100MHz memory bus speed and the support for 350MHz and 400MHz CPU's. Note the previous 440LX chip set only supports a 66MHz memory bus speed and CPU's up to 333MHz. The memory bus speed is particularly important as modern day CPU's are starved for data and waste many idle cycles waiting for data to be fetched from RAM. The 440BX defaults to a 66MHz bus speed when used with a 333MHz or slower Pentium II processor. It only uses the 100MHz bus speed for 350MHz and 400MHz processors. At 66MHz normal 10ns SDRAM is utilized. At 100MHz special PC100 certified SDRAM is specified by Intel. However, many vendors have found that normal 10ns SDRAM works just fine on the ASUS P2B 440BX motherboard running with a 400MHz processor and a 100MHz memory bus. They have even claimed that the cheaper 10ns SDRAM has no performance penalty. This is not the case. We concede that the standard 10ns SDRAM appears to work fine on the 100MHz bus. We have been running Linux and Windows NT with normal 10ns SDRAM at this speed for over two weeks without any stability problems. However, the performance is not as good as the same system running PC100 SDRAM. Let's look at some Stream results.

We used Stream under Linux to test memory I/O. Our test setup for the 440BX included a Pentium II 400MHz CPU, 128MB's of SDRAM, two BusLogic 958's, a 3COM 3C905, Matrox Millennium II PCI video card (with Xi Graphics AX Server under Linux ), SB64 PnP and miscellaneous SCSI devices. Our test setup for the 440LX and 440FX included a Pentium II 266 CPU, 128MB's RAM (SDRAM for the LX and EDO RAM for the FX). The other devices were identical to the 440BX setup.

The PC100 SDRAM on the 440BX with a Pentium II 400MHz processor was the fastest by far and even faster than the 533MHz Alpha LX system. Standard 10ns SDRAM was stable but over 10.6% slower than PC100 SDRAM. So called Premium BX SDRAM sold by many vendors as BX compatible (but not PC100 certified) was even slower than the standard 10ns SDRAM. However, clearly memory intensive applications will get a huge boost using any of these types of SDRAM with the 440BX chip set.

The results of the 400MHz 440BX test machine are much better than anything posted for the DEC Alpha family, the SUN Ultra2 family or the HP 9000 series. You may want to compare these results with the Stream results table. The Stream results table compares Stream results obtained on a wide variety of architectures.

You may have also noticed that we have "slow" PC100 SDRAM listed in addition to the "fast" PC100 SDRAM. This is less expensive SDRAM that is about 16.5% slower than its more expensive cousin. We should note however, that the less expensive "slow" PC100 SDRAM is still PC100 compliant and is not of a lower quality. The slow memory is stable, all memory addresses check out and it is brand named. The only difference is the speed and the price tag. The slow PC100 SDRAM may be a good choice for folks on a budget who want a 440BX board with compatible PC100 SDRAM. This leaves an easy upgrade path to a high performance system down the road. In contrast, those looking for servers or workstations that are data intensive should probably take the leap and buy fast PC100 SDRAM.

***Note that the Tyan Tiger 100 (S1832DL) performs at about half the speed of the comparable ASUS and Intel boards when JP2 is set to factory default. JP2 is undocumented. Removing JP2 sets the queuing depth from 1 to 4. When removed this board benchmarks nearly identically to the other 440BX boards in its class. This may have been the cause of the bad review on Tom's Hardware guide.

MDBNCH: A molecular dynamics benchmark is an excellent benchmark for those interested in scientific calculations in general and molecular dynamics in particular. We used MDBNCH to compare our 400MHz 440BX configuration (as noted above) to our reference 440LX 266MHz machine.

The results of the 400MHz Pentium II on the 440BX chip set are on par with the 333MHz DEC Alpha, the 200MHz Sun Ultra 2, the 266MHz PowerMac G3, and the Cray T90. You may want to compare these results with the MDBNCH results table. The MDBNCH results table compares MDBNCH results of obtained on a wide variety of architectures.

More analysis and numbers to come!

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

ASUS P2B 440BX w/128MB SDRAM - PC100

440BX Fast PC100 SDRAM: 307.1459MB/S 

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 3 microseconds.
Each test below will take on the order of 134362 microseconds.
   (= 44787 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         282.6390       0.1699       0.1698       0.1704
Scale:        286.6116       0.1677       0.1675       0.1683
Add:          343.3510       0.2110       0.2097       0.2219
Triad:        315.9821       0.2282       0.2279       0.2288

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

ASUS P2B 440BX w/128MB SDRAM - PC100

440BX Slow PC100 SDRAM: 263.6705MB/S 

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 3 microseconds.
Each test below will take on the order of 162741 microseconds.
   (= 54247 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         241.2120       0.2065       0.1990       0.2195
Scale:        242.0002       0.2091       0.1983       0.2220
Add:          289.1473       0.2674       0.2490       0.2865
Triad:        282.3208       0.2695       0.2550       0.2859

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

ASUS P2B 440BX w/128MB SDRAM - 10ns

440BX 10ns SDRAM: 277.66715MB/S 

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 2 microseconds.
Each test below will take on the order of 155724 microseconds.
   (= 77862 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         254.1983       0.1890       0.1888       0.1892
Scale:        255.2242       0.1882       0.1881       0.1885
Add:          302.2378       0.2391       0.2382       0.2453
Triad:        299.0083       0.2414       0.2408       0.2451

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

ASUS P2B 440BX w/128MB SDRAM - Premium

440BX BX Premium SDRAM: 255.8955MB/S 

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 3 microseconds.
Each test below will take on the order of 162023 microseconds.
   (= 54007 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         237.2033       0.2025       0.2024       0.2028
Scale:        235.9162       0.2036       0.2035       0.2039
Add:          278.9509       0.2583       0.2581       0.2586
Triad:        271.5116       0.2656       0.2652       0.2667

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

SuperMicro S2DGU 440GX Dual Xeon 400MHz-512K w/128MB SDRAM

440GX SDRAM: 336.1738MB/S 

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 5 microseconds.
Each test below will take on the order of 125635 microseconds.
   (= 25127 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         318.4565       0.1509       0.1507       0.1521
Scale:        317.5799       0.1512       0.1511       0.1516
Add:          402.2862       0.1790       0.1790       0.1790
Triad:        306.3726       0.2351       0.2350       0.2352  

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

Intel SC450NX 440GX Quad Xeon 400MHz-512K w/3GB ECC EDO RAM 4-Way Interleaved

440GX ECC EDO DRAM 4-Way Interleaved: 258.60628MB/S 

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 2 microseconds.
Each test below will take on the order of 166825 microseconds.
   (= 83412 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         236.5139       0.2035       0.2029       0.2071
Scale:        241.9891       0.1984       0.1984       0.1985
Add:          287.9229       0.2502       0.2501       0.2502
Triad:        267.9987       0.2688       0.2687       0.2690  

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

ASUS P2B 440BX w/128MB SDRAM - Premium

440BX BX Premium SDRAM: 255.8955MB/S 

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 3 microseconds.
Each test below will take on the order of 162023 microseconds.
   (= 54007 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         237.2033       0.2025       0.2024       0.2028
Scale:        235.9162       0.2036       0.2035       0.2039
Add:          278.9509       0.2583       0.2581       0.2586
Triad:        271.5116       0.2656       0.2652       0.2667

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

ASUS P297 440LX w/128MB SDRAM 10ns

440LX 10ns SDRAM: 174.0MB/S 

Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         165.5172       0.2960       0.2900       0.3000
Scale:        165.5172       0.2960       0.2900       0.3000
Add:          189.4737       0.3860       0.3800       0.3900
Triad:        175.6098       0.4110       0.4100       0.4200

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 3000000

ASUS KN97-X 440FX w/128MB EDO RAM 60ns

440FX 60ns EDO RAM: 98.3MB/S

Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:          92.3077       0.5271       0.5200       0.5400
Scale:         92.3077       0.5271       0.5200       0.5500
Add:          102.8571       0.7091       0.7000       0.7400
Triad:        105.8824       0.6941       0.6800       0.7200

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 4000000

DEC Alpha 21164 164LX 533MHz 10ns SDRAM: 239.84470MB/S

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word. 
-------------------------------------------------------------
Array size = 4000000, Offset = 0
Total memory required = 91.6 MB.
Each test is run 10 times, but onlythe *best* time for each is used. 
-------------------------------------------------------------
Your clock granularity/precision appears to be 6999 microseconds.
Each test below will take on the order of 156000 microseconds. 
(= 22 clock ticks)
Increase the size of the arrays if this shows thatyou are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.For best results, please be sure you know the precision of your system timer. 
-------------------------------------------------------------
Function Rate (MB/s) RMS time Min time Max time
Copy: 227.7581 0.2818 0.2810 0.2890
Scale: 227.7580 0.2814 0.2810 0.2820
Add: 267.4095 0.3650 0.3590 0.3680
Triad: 236.4533 0.4070 0.4060 0.4140

Stream and Stream ftp

gcc -O3 stream_d.c second_cpu.c -o stream_d -lm

Define N 4000000

Tyan Tiger 100 S1832DL 440BX w/128MB SDRAM - Premium

440BX Fast SDRAM: 149.7MB/S

-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 3000000, Offset = 0
Total memory required = 68.7 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 3 microseconds.
Each test below will take on the order of 266046 microseconds.
   (= 88682 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function      Rate (MB/s)   RMS time     Min time     Max time
Copy:         142.0492       0.3382       0.3379       0.3389
Scale:        138.4475       0.3468       0.3467       0.3470
Add:          161.5886       0.4457       0.4456       0.4460
Triad:        156.5885       0.4599       0.4598       0.4601

MDBNCH: A molecular dynamics benchmark

      MDBNCH: A MOLECULAR DYNAMICS BENCHMARK, VERSION OF DECEMBER 17, 1988

 *******************************************************************************

 MD BENCHMARK FOR   256 PARTICLES, 1000 STEPS.
 O(N**2) BRUTE FORCE LIST FORMATION EVERY 10 WITH SKIN = 1.00
 PAIR CORRELATION FUNCTION NOT COMPUTED

  STEP LP  KIN.E   POT.E   TOT.E   DIFFUS     PX       PY       PZ   
  ---- -- ------- ------- ------- -------- -------- -------- --------
 LENGTH =    3217/  163840
     1 L   0.0000 -3.0509 -3.0509   0.0000 -0.2E-15 -0.3E-15  0.9E-16
   100     0.2910 -3.3382 -3.0471   0.9499  0.2E-14 -0.3E-15  0.2E-14
   200     0.2702 -3.3175 -3.0472   1.9745 -0.5E-14 -0.1E-14  0.9E-14
   300     0.2841 -3.3312 -3.0471   3.7518 -0.9E-14  0.4E-14  0.9E-14
   400     0.2733 -3.3205 -3.0472   6.0875 -0.6E-14  0.6E-14  0.1E-13
   500     0.2559 -3.3032 -3.0473   8.5818 -0.7E-14  0.1E-13  0.1E-13
   600     0.2742 -3.3215 -3.0473  10.3208 -0.1E-13  0.1E-13  0.1E-13
   700     0.2629 -3.3101 -3.0473  11.5886 -0.1E-13  0.9E-14  0.9E-14
   800     0.2705 -3.3178 -3.0473  13.2489 -0.5E-14  0.1E-13  0.1E-13
   900     0.2775 -3.3248 -3.0472  14.6319  0.3E-14  0.6E-14  0.1E-13
  1000     0.2628 -3.3098 -3.0470  17.3379  0.9E-14  0.1E-13  0.5E-14

  1000 TIME STEPS,  100 LIST UPDATES
    0.010000 SEC. CP TIME FOR INITIALIZATION
    0.820000 SEC. CP TIME UPDATING THE LIST        (  0.008200 SEC/UPD. )
    4.360000 SEC. CP TIME CALCULATING FORCES       (  0.004360 SEC/STEP )
    1.110000 SEC. CP TIME FOR TIME INTEGRATION     (  0.001110 SEC/STEP )
    0.140000 SEC. CP TIME FOR OTHER TASKS          (  0.000140 SEC/STEP )
    6.430000 SEC. CP TIME EXCLUDING INITIALIZATION (  0.006430 SEC/STEP )
    6.440000 SEC. TOTAL CP TIME

 *******************************************************************************

 MD BENCHMARK FOR  2048 PARTICLES,   10 STEPS.
 O(N) CELL-METHOD LIST FORMATION EVERY 10 WITH SKIN = 1.00
 PAIR CORRELATION FUNCTION NOT COMPUTED

  STEP LP  KIN.E   POT.E   TOT.E   DIFFUS     PX       PY       PZ   
  ---- -- ------- ------- ------- -------- -------- -------- --------
 LENGTH=  25804/ 163840, CELLS=  216/ 8192, PA/CL= 14/227, CA/PA=  153/  512
     1 L   0.0000 -3.0509 -3.0509   0.0000 -0.6E-15 -0.3E-15  0.3E-14
     2     0.2342 -3.1315 -2.8973   0.0003  0.1E-14  0.9E-15  0.9E-14
     3     0.0307 -3.1927 -3.1621   0.0011 -0.2E-15 -0.6E-15  0.3E-14
     4     0.3514 -3.3028 -2.9514   0.0050  0.1E-14  0.6E-14 -0.9E-14
     5     0.3104 -3.3813 -3.0709   0.0114  0.3E-14  0.1E-14 -0.1E-13
     6     0.4201 -3.4501 -3.0300   0.0226  0.1E-14  0.3E-14 -0.4E-14
     7     0.4511 -3.5038 -3.0527   0.0384 -0.6E-14  0.1E-13 -0.7E-14
     8     0.4971 -3.5438 -3.0467   0.0597  0.2E-14 -0.1E-14 -0.7E-14
     9     0.5224 -3.5707 -3.0484   0.0865 -0.5E-14  0.6E-14  0.1E-13
    10     0.5373 -3.5853 -3.0480   0.1190 -0.2E-14  0.4E-14  0.9E-14

    10 TIME STEPS,    1 LIST UPDATES
    0.010000 SEC. CP TIME FOR INITIALIZATION
    0.060000 SEC. CP TIME UPDATING THE LIST        (  0.060000 SEC/UPD. )
    0.299999 SEC. CP TIME CALCULATING FORCES       (  0.030000 SEC/STEP )
    0.100001 SEC. CP TIME FOR TIME INTEGRATION     (  0.010000 SEC/STEP )
    0.030001 SEC. CP TIME FOR OTHER TASKS          (  0.003000 SEC/STEP )
    0.490000 SEC. CP TIME EXCLUDING INITIALIZATION (  0.049000 SEC/STEP )
    0.500000 SEC. TOTAL CP TIME

 *******************************************************************************

 MD BENCHMARK FOR  2048 PARTICLES,   10 STEPS.
 O(N**2) BRUTE FORCE LIST FORMATION EVERY 10 WITH SKIN = 1.00
 PAIR CORRELATION FUNCTION NOT COMPUTED

  STEP LP  KIN.E   POT.E   TOT.E   DIFFUS     PX       PY       PZ   
  ---- -- ------- ------- ------- -------- -------- -------- --------
 LENGTH =   25804/  163840
     1 L   0.0000 -3.0509 -3.0509   0.0000 -0.8E-15 -0.6E-15  0.2E-14
     2     0.2342 -3.1315 -2.8973   0.0003  0.7E-14 -0.2E-15  0.1E-14
     3     0.0307 -3.1927 -3.1621   0.0011  0.2E-14 -0.4E-15  0.2E-14
     4     0.3514 -3.3028 -2.9514   0.0050 -0.3E-14 -0.6E-15 -0.2E-14
     5     0.3104 -3.3813 -3.0709   0.0114 -0.3E-14  0.2E-14 -0.8E-14
     6     0.4201 -3.4501 -3.0300   0.0226  0.5E-14  0.4E-14  0.2E-14
     7     0.4511 -3.5038 -3.0527   0.0384 -0.1E-13  0.5E-14  0.8E-15
     8     0.4971 -3.5438 -3.0467   0.0597 -0.1E-14  0.9E-14 -0.1E-13
     9     0.5224 -3.5707 -3.0484   0.0865 -0.8E-14  0.3E-15  0.5E-14
    10     0.5373 -3.5853 -3.0480   0.1190 -0.1E-13  0.3E-15 -0.7E-14

    10 TIME STEPS,    1 LIST UPDATES
    0.010000 SEC. CP TIME FOR INITIALIZATION
    0.420000 SEC. CP TIME UPDATING THE LIST        (  0.420000 SEC/UPD. )
    0.289998 SEC. CP TIME CALCULATING FORCES       (  0.029000 SEC/STEP )
    0.100002 SEC. CP TIME FOR TIME INTEGRATION     (  0.010000 SEC/STEP )
    0.030000 SEC. CP TIME FOR OTHER TASKS          (  0.003000 SEC/STEP )
    0.840000 SEC. CP TIME EXCLUDING INITIALIZATION (  0.084000 SEC/STEP )
    0.850000 SEC. TOTAL CP TIME

 *******************************************************************************

 MD BENCHMARK FOR  2048 PARTICLES,   10 STEPS.
 O(N**2) BRUTE FORCE LIST FORMATION EVERY 10 WITH SKIN = 1.00
 PAIR CORRELATION FUNCTION COMPUTED EVERY 10 STEPS

  STEP LP  KIN.E   POT.E   TOT.E   DIFFUS     PX       PY       PZ   
  ---- -- ------- ------- ------- -------- -------- -------- --------
 LENGTH =   25804/  163840
     1 G   0.0000 -3.0509 -3.0509   0.0000 -0.8E-15 -0.6E-15  0.2E-14
     2     0.2342 -3.1315 -2.8973   0.0003  0.7E-14 -0.2E-15  0.1E-14
     3     0.0307 -3.1927 -3.1621   0.0011  0.2E-14 -0.4E-15  0.2E-14
     4     0.3514 -3.3028 -2.9514   0.0050 -0.3E-14 -0.6E-15 -0.2E-14
     5     0.3104 -3.3813 -3.0709   0.0114 -0.3E-14  0.2E-14 -0.8E-14
     6     0.4201 -3.4501 -3.0300   0.0226  0.5E-14  0.4E-14  0.2E-14
     7     0.4511 -3.5038 -3.0527   0.0384 -0.1E-13  0.5E-14  0.8E-15
     8     0.4971 -3.5438 -3.0467   0.0597 -0.1E-14  0.9E-14 -0.1E-13
     9     0.5224 -3.5707 -3.0484   0.0865 -0.8E-14  0.3E-15  0.5E-14
    10     0.5373 -3.5853 -3.0480   0.1190 -0.1E-13  0.3E-15 -0.7E-14

    10 TIME STEPS,    1 LIST UPDATES
    0.020000 SEC. CP TIME FOR INITIALIZATION
    0.840001 SEC. CP TIME UPDATING THE LIST        (  0.840001 SEC/UPD. )
    0.340000 SEC. CP TIME CALCULATING FORCES       (  0.034000 SEC/STEP )
    0.110000 SEC. CP TIME FOR TIME INTEGRATION     (  0.011000 SEC/STEP )
    0.010000 SEC. CP TIME FOR OTHER TASKS          (  0.001000 SEC/STEP )
    1.300001 SEC. CP TIME EXCLUDING INITIALIZATION (  0.130000 SEC/STEP )
    1.320001 SEC. TOTAL CP TIME

 *******************************************************************************

 MD BENCHMARK FOR  2048 PARTICLES,   10 STEPS.
 O(N) CELL-METHOD LIST FORMATION EVERY 10 WITH SKIN = 1.50
 PAIR CORRELATION FUNCTION NOT COMPUTED

  STEP LP  KIN.E   POT.E   TOT.E   DIFFUS     PX       PY       PZ   
  ---- -- ------- ------- ------- -------- -------- -------- --------
 LENGTH=  38121/ 163840, CELLS=  216/ 8192, PA/CL= 14/227, CA/PA=  153/  512
     1 L   0.0000 -3.0509 -3.0509   0.0000 -0.6E-15 -0.3E-15  0.3E-14
     2     0.2342 -3.1315 -2.8973   0.0003  0.1E-14  0.9E-15  0.9E-14
     3     0.0307 -3.1927 -3.1621   0.0011 -0.2E-15 -0.6E-15  0.3E-14
     4     0.3514 -3.3028 -2.9514   0.0050  0.1E-14  0.6E-14 -0.9E-14
     5     0.3104 -3.3813 -3.0709   0.0114  0.3E-14  0.1E-14 -0.1E-13
     6     0.4201 -3.4501 -3.0300   0.0226  0.1E-14  0.3E-14 -0.4E-14
     7     0.4511 -3.5038 -3.0527   0.0384 -0.6E-14  0.1E-13 -0.7E-14
     8     0.4971 -3.5438 -3.0467   0.0597  0.2E-14 -0.1E-14 -0.7E-14
     9     0.5224 -3.5707 -3.0484   0.0865 -0.5E-14  0.6E-14  0.1E-13
    10     0.5373 -3.5853 -3.0480   0.1190 -0.4E-14  0.7E-14  0.5E-14

    10 TIME STEPS,    1 LIST UPDATES
    0.020000 SEC. CP TIME FOR INITIALIZATION
    0.060000 SEC. CP TIME UPDATING THE LIST        (  0.060000 SEC/UPD. )
    0.370000 SEC. CP TIME CALCULATING FORCES       (  0.037000 SEC/STEP )
    0.080001 SEC. CP TIME FOR TIME INTEGRATION     (  0.008000 SEC/STEP )
    0.039999 SEC. CP TIME FOR OTHER TASKS          (  0.004000 SEC/STEP )
    0.550000 SEC. CP TIME EXCLUDING INITIALIZATION (  0.055000 SEC/STEP )
    0.570000 SEC. TOTAL CP TIME

 *******************************************************************************

 MD BENCHMARK FOR  2048 PARTICLES,   10 STEPS.
 O(N) CELL-METHOD LIST FORMATION EVERY  5 WITH SKIN = 0.30
 PAIR CORRELATION FUNCTION NOT COMPUTED

  STEP LP  KIN.E   POT.E   TOT.E   DIFFUS     PX       PY       PZ   
  ---- -- ------- ------- ------- -------- -------- -------- --------
 LENGTH=  15704/ 163840, CELLS=  343/ 8192, PA/CL= 12/143, CA/PA=   98/  512
     1 L   0.0000 -3.0509 -3.0509   0.0000 -0.7E-15 -0.1E-15  0.2E-14
     2     0.2342 -3.1315 -2.8973   0.0003 -0.6E-15  0.3E-14  0.3E-15
     3     0.0307 -3.1927 -3.1621   0.0011 -0.4E-14 -0.8E-15  0.5E-14
     4     0.3514 -3.3028 -2.9514   0.0050 -0.4E-14  0.4E-14  0.8E-14
     5     0.3104 -3.3813 -3.0709   0.0114 -0.6E-14  0.2E-14 -0.1E-13
 LENGTH=  15611/ 163840, CELLS=  343/ 8192, PA/CL= 11/143, CA/PA=  101/  512
     6 L   0.4201 -3.4501 -3.0300   0.0226  0.2E-14  0.4E-14 -0.2E-13
     7     0.4511 -3.5038 -3.0527   0.0384 -0.8E-14 -0.9E-14 -0.2E-13
     8     0.4971 -3.5438 -3.0467   0.0597 -0.8E-14  0.2E-15 -0.6E-15
     9     0.5224 -3.5707 -3.0484   0.0865 -0.1E-13  0.7E-14 -0.7E-15
    10     0.5373 -3.5853 -3.0480   0.1190 -0.2E-13  0.5E-14 -0.1E-13

    10 TIME STEPS,    2 LIST UPDATES
    0.020000 SEC. CP TIME FOR INITIALIZATION
    0.080000 SEC. CP TIME UPDATING THE LIST        (  0.040000 SEC/UPD. )
    0.250001 SEC. CP TIME CALCULATING FORCES       (  0.025000 SEC/STEP )
    0.079999 SEC. CP TIME FOR TIME INTEGRATION     (  0.008000 SEC/STEP )
    0.020000 SEC. CP TIME FOR OTHER TASKS          (  0.002000 SEC/STEP )
    0.430000 SEC. CP TIME EXCLUDING INITIALIZATION (  0.043000 SEC/STEP )
    0.450000 SEC. TOTAL CP TIME

 *******************************************************************************

 MD BENCHMARK FOR 16384 PARTICLES,   10 STEPS.
 O(N) CELL-METHOD LIST FORMATION EVERY  5 WITH SKIN = 0.50
 PAIR CORRELATION FUNCTION NOT COMPUTED

  STEP LP  KIN.E   POT.E   TOT.E   DIFFUS     PX       PY       PZ   
  ---- -- ------- ------- ------- -------- -------- -------- --------
 LENGTH= 140453/ 163840, CELLS= 3375/ 8192, PA/CL= 11/ 14, CA/PA=   88/  512
     1 L   0.0000 -3.0548 -3.0548   0.0000 -0.1E-14  0.3E-14 -0.2E-14
     2     0.2426 -3.1375 -2.8949   0.0003 -0.1E-13  0.3E-14  0.1E-13
     3     0.0303 -3.1989 -3.1686   0.0011 -0.7E-14 -0.2E-13 -0.1E-13
     4     0.3583 -3.3088 -2.9504   0.0051  0.3E-13  0.3E-13 -0.9E-13
     5     0.3103 -3.3861 -3.0758   0.0116  0.5E-13  0.3E-14 -0.6E-13
 LENGTH= 137737/ 163840, CELLS= 3375/ 8192, PA/CL= 10/ 14, CA/PA=   91/  512
     6 L   0.4203 -3.4536 -3.0332   0.0228 -0.4E-13  0.5E-13 -0.2E-13
     7     0.4490 -3.5058 -3.0568   0.0386 -0.1E-13  0.7E-15  0.1E-13
     8     0.4941 -3.5446 -3.0505   0.0599 -0.3E-13  0.2E-13  0.1E-13
     9     0.5183 -3.5706 -3.0523   0.0867 -0.2E-13 -0.9E-14 -0.3E-13
    10     0.5328 -3.5845 -3.0517   0.1190 -0.3E-13 -0.3E-13  0.1E-12

    10 TIME STEPS,    2 LIST UPDATES
    0.020000 SEC. CP TIME FOR INITIALIZATION
    0.620001 SEC. CP TIME UPDATING THE LIST        (  0.310000 SEC/UPD. )
    2.379998 SEC. CP TIME CALCULATING FORCES       (  0.238000 SEC/STEP )
    0.940000 SEC. CP TIME FOR TIME INTEGRATION     (  0.094000 SEC/STEP )
    0.180001 SEC. CP TIME FOR OTHER TASKS          (  0.018000 SEC/STEP )
    4.120000 SEC. CP TIME EXCLUDING INITIALIZATION (  0.412000 SEC/STEP )
    4.139999 SEC. TOTAL CP TIME

 *******************************************************************************
 COMPLETE BENCHMARK EXECUTION TIME :   14.420000 CP SECONDS.

MDBNCH: A molecular dynamics benchmark

MDBNCH: A MOLECULAR DYNAMICS BENCHMARK, VERSION OF DECEMBER 17, 1988

*******************************************************************************

MD BENCHMARK FOR 256 PARTICLES, 1000 STEPS.
O(N**2) BRUTE FORCE LIST FORMATION EVERY 10 WITH SKIN = 1.00
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH = 3217/ 163840
1 L 0.0000 -3.0509 -3.0509 0.0000 -0.2E-15 -0.3E-15 0.9E-16
100 0.2910 -3.3382 -3.0471 0.9499 0.2E-14 -0.3E-15 0.2E-14
200 0.2702 -3.3175 -3.0472 1.9745 -0.5E-14 -0.1E-14 0.9E-14
300 0.2841 -3.3312 -3.0471 3.7518 -0.9E-14 0.4E-14 0.9E-14
400 0.2733 -3.3205 -3.0472 6.0875 -0.6E-14 0.6E-14 0.1E-13
500 0.2559 -3.3032 -3.0473 8.5818 -0.7E-14 0.1E-13 0.1E-13
600 0.2742 -3.3215 -3.0473 10.3208 -0.1E-13 0.1E-13 0.1E-13
700 0.2629 -3.3101 -3.0473 11.5886 -0.1E-13 0.9E-14 0.9E-14
800 0.2705 -3.3178 -3.0473 13.2489 -0.5E-14 0.1E-13 0.1E-13
900 0.2775 -3.3248 -3.0472 14.6319 0.3E-14 0.6E-14 0.1E-13
1000 0.2628 -3.3098 -3.0470 17.3379 0.9E-14 0.1E-13 0.5E-14

1000 TIME STEPS, 100 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
1.210001 SEC. CP TIME UPDATING THE LIST ( 0.012100 SEC/UPD. )
6.840006 SEC. CP TIME CALCULATING FORCES ( 0.006840 SEC/STEP )
1.079994 SEC. CP TIME FOR TIME INTEGRATION ( 0.001080 SEC/STEP )
0.119999 SEC. CP TIME FOR OTHER TASKS ( 0.000120 SEC/STEP )
9.249999 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.009250 SEC/STEP )
9.269999 SEC. TOTAL CP TIME

*******************************************************************************

MD BENCHMARK FOR 2048 PARTICLES, 10 STEPS.
O(N) CELL-METHOD LIST FORMATION EVERY 10 WITH SKIN = 1.00
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH= 25804/ 163840, CELLS= 216/ 8192, PA/CL= 14/227, CA/PA= 153/ 512
1 L 0.0000 -3.0509 -3.0509 0.0000 -0.6E-15 -0.3E-15 0.3E-14
2 0.2342 -3.1315 -2.8973 0.0003 0.1E-14 0.9E-15 0.9E-14
3 0.0307 -3.1927 -3.1621 0.0011 -0.2E-15 -0.6E-15 0.3E-14
4 0.3514 -3.3028 -2.9514 0.0050 0.1E-14 0.6E-14 -0.9E-14
5 0.3104 -3.3813 -3.0709 0.0114 0.3E-14 0.1E-14 -0.1E-13
6 0.4201 -3.4501 -3.0300 0.0226 0.1E-14 0.3E-14 -0.4E-14
7 0.4511 -3.5038 -3.0527 0.0384 -0.6E-14 0.1E-13 -0.7E-14
8 0.4971 -3.5438 -3.0467 0.0597 0.2E-14 -0.1E-14 -0.7E-14
9 0.5224 -3.5707 -3.0484 0.0865 -0.5E-14 0.6E-14 0.1E-13
10 0.5373 -3.5853 -3.0480 0.1190 -0.2E-14 0.4E-14 0.9E-14

10 TIME STEPS, 1 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
0.090000 SEC. CP TIME UPDATING THE LIST ( 0.090000 SEC/UPD. )
0.400000 SEC. CP TIME CALCULATING FORCES ( 0.040000 SEC/STEP )
0.119999 SEC. CP TIME FOR TIME INTEGRATION ( 0.012000 SEC/STEP )
0.080001 SEC. CP TIME FOR OTHER TASKS ( 0.008000 SEC/STEP )
0.690000 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.069000 SEC/STEP )
0.709999 SEC. TOTAL CP TIME

*******************************************************************************

MD BENCHMARK FOR 2048 PARTICLES, 10 STEPS.
O(N**2) BRUTE FORCE LIST FORMATION EVERY 10 WITH SKIN = 1.00
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH = 25804/ 163840
1 L 0.0000 -3.0509 -3.0509 0.0000 -0.8E-15 -0.6E-15 0.2E-14
2 0.2342 -3.1315 -2.8973 0.0003 0.7E-14 -0.2E-15 0.1E-14
3 0.0307 -3.1927 -3.1621 0.0011 0.2E-14 -0.4E-15 0.2E-14
4 0.3514 -3.3028 -2.9514 0.0050 -0.3E-14 -0.6E-15 -0.2E-14
5 0.3104 -3.3813 -3.0709 0.0114 -0.3E-14 0.2E-14 -0.8E-14
6 0.4201 -3.4501 -3.0300 0.0226 0.5E-14 0.4E-14 0.2E-14
7 0.4511 -3.5038 -3.0527 0.0384 -0.1E-13 0.5E-14 0.8E-15
8 0.4971 -3.5438 -3.0467 0.0597 -0.1E-14 0.9E-14 -0.1E-13
9 0.5224 -3.5707 -3.0484 0.0865 -0.8E-14 0.3E-15 0.5E-14
10 0.5373 -3.5853 -3.0480 0.1190 -0.1E-13 0.3E-15 -0.7E-14

10 TIME STEPS, 1 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
0.620000 SEC. CP TIME UPDATING THE LIST ( 0.620000 SEC/UPD. )
0.490001 SEC. CP TIME CALCULATING FORCES ( 0.049000 SEC/STEP )
0.070000 SEC. CP TIME FOR TIME INTEGRATION ( 0.007000 SEC/STEP )
0.030000 SEC. CP TIME FOR OTHER TASKS ( 0.003000 SEC/STEP )
1.210000 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.121000 SEC/STEP )
1.230000 SEC. TOTAL CP TIME

*******************************************************************************

MD BENCHMARK FOR 2048 PARTICLES, 10 STEPS.
O(N**2) BRUTE FORCE LIST FORMATION EVERY 10 WITH SKIN = 1.00
PAIR CORRELATION FUNCTION COMPUTED EVERY 10 STEPS

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH = 25804/ 163840
1 G 0.0000 -3.0509 -3.0509 0.0000 -0.8E-15 -0.6E-15 0.2E-14
2 0.2342 -3.1315 -2.8973 0.0003 0.7E-14 -0.2E-15 0.1E-14
3 0.0307 -3.1927 -3.1621 0.0011 0.2E-14 -0.4E-15 0.2E-14
4 0.3514 -3.3028 -2.9514 0.0050 -0.3E-14 -0.6E-15 -0.2E-14
5 0.3104 -3.3813 -3.0709 0.0114 -0.3E-14 0.2E-14 -0.8E-14
6 0.4201 -3.4501 -3.0300 0.0226 0.5E-14 0.4E-14 0.2E-14
7 0.4511 -3.5038 -3.0527 0.0384 -0.1E-13 0.5E-14 0.8E-15
8 0.4971 -3.5438 -3.0467 0.0597 -0.1E-14 0.9E-14 -0.1E-13
9 0.5224 -3.5707 -3.0484 0.0865 -0.8E-14 0.3E-15 0.5E-14
10 0.5373 -3.5853 -3.0480 0.1190 -0.1E-13 0.3E-15 -0.7E-14

10 TIME STEPS, 1 LIST UPDATES
0.030000 SEC. CP TIME FOR INITIALIZATION
1.500000 SEC. CP TIME UPDATING THE LIST ( 1.500000 SEC/UPD. )
0.540001 SEC. CP TIME CALCULATING FORCES ( 0.054000 SEC/STEP )
0.080000 SEC. CP TIME FOR TIME INTEGRATION ( 0.008000 SEC/STEP )
0.039999 SEC. CP TIME FOR OTHER TASKS ( 0.004000 SEC/STEP )
2.160000 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.216000 SEC/STEP )
2.190000 SEC. TOTAL CP TIME

*******************************************************************************

MD BENCHMARK FOR 2048 PARTICLES, 10 STEPS.
O(N) CELL-METHOD LIST FORMATION EVERY 10 WITH SKIN = 1.50
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH= 38121/ 163840, CELLS= 216/ 8192, PA/CL= 14/227, CA/PA= 153/ 512
1 L 0.0000 -3.0509 -3.0509 0.0000 -0.6E-15 -0.3E-15 0.3E-14
2 0.2342 -3.1315 -2.8973 0.0003 0.1E-14 0.9E-15 0.9E-14
3 0.0307 -3.1927 -3.1621 0.0011 -0.2E-15 -0.6E-15 0.3E-14
4 0.3514 -3.3028 -2.9514 0.0050 0.1E-14 0.6E-14 -0.9E-14
5 0.3104 -3.3813 -3.0709 0.0114 0.3E-14 0.1E-14 -0.1E-13
6 0.4201 -3.4501 -3.0300 0.0226 0.1E-14 0.3E-14 -0.4E-14
7 0.4511 -3.5038 -3.0527 0.0384 -0.6E-14 0.1E-13 -0.7E-14
8 0.4971 -3.5438 -3.0467 0.0597 0.2E-14 -0.1E-14 -0.7E-14
9 0.5224 -3.5707 -3.0484 0.0865 -0.5E-14 0.6E-14 0.1E-13
10 0.5373 -3.5853 -3.0480 0.1190 -0.4E-14 0.7E-14 0.5E-14

10 TIME STEPS, 1 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
0.090000 SEC. CP TIME UPDATING THE LIST ( 0.090000 SEC/UPD. )
0.569999 SEC. CP TIME CALCULATING FORCES ( 0.057000 SEC/STEP )
0.080000 SEC. CP TIME FOR TIME INTEGRATION ( 0.008000 SEC/STEP )
0.040001 SEC. CP TIME FOR OTHER TASKS ( 0.004000 SEC/STEP )
0.780000 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.078000 SEC/STEP )
0.800000 SEC. TOTAL CP TIME

*******************************************************************************

MD BENCHMARK FOR 2048 PARTICLES, 10 STEPS.
O(N) CELL-METHOD LIST FORMATION EVERY 5 WITH SKIN = 0.30
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH= 15704/ 163840, CELLS= 343/ 8192, PA/CL= 12/143, CA/PA= 98/ 512
1 L 0.0000 -3.0509 -3.0509 0.0000 -0.7E-15 -0.1E-15 0.2E-14
2 0.2342 -3.1315 -2.8973 0.0003 -0.6E-15 0.3E-14 0.3E-15
3 0.0307 -3.1927 -3.1621 0.0011 -0.4E-14 -0.8E-15 0.5E-14
4 0.3514 -3.3028 -2.9514 0.0050 -0.4E-14 0.4E-14 0.8E-14
5 0.3104 -3.3813 -3.0709 0.0114 -0.6E-14 0.2E-14 -0.1E-13
LENGTH= 15611/ 163840, CELLS= 343/ 8192, PA/CL= 11/143, CA/PA= 101/ 512
6 L 0.4201 -3.4501 -3.0300 0.0226 0.2E-14 0.4E-14 -0.2E-13
7 0.4511 -3.5038 -3.0527 0.0384 -0.8E-14 -0.9E-14 -0.2E-13
8 0.4971 -3.5438 -3.0467 0.0597 -0.8E-14 0.2E-15 -0.6E-15
9 0.5224 -3.5707 -3.0484 0.0865 -0.1E-13 0.7E-14 -0.7E-15
10 0.5373 -3.5853 -3.0480 0.1190 -0.2E-13 0.5E-14 -0.1E-13

10 TIME STEPS, 2 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
0.120000 SEC. CP TIME UPDATING THE LIST ( 0.060000 SEC/UPD. )
0.370000 SEC. CP TIME CALCULATING FORCES ( 0.037000 SEC/STEP )
0.110001 SEC. CP TIME FOR TIME INTEGRATION ( 0.011000 SEC/STEP )
0.030000 SEC. CP TIME FOR OTHER TASKS ( 0.003000 SEC/STEP )
0.630000 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.063000 SEC/STEP )
0.650000 SEC. TOTAL CP TIME

*******************************************************************************

MD BENCHMARK FOR 16384 PARTICLES, 10 STEPS.
O(N) CELL-METHOD LIST FORMATION EVERY 5 WITH SKIN = 0.50
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH= 140453/ 163840, CELLS= 3375/ 8192, PA/CL= 11/ 14, CA/PA= 88/ 512
1 L 0.0000 -3.0548 -3.0548 0.0000 -0.1E-14 0.3E-14 -0.2E-14
2 0.2426 -3.1375 -2.8949 0.0003 -0.1E-13 0.3E-14 0.1E-13
3 0.0303 -3.1989 -3.1686 0.0011 -0.7E-14 -0.2E-13 -0.1E-13
4 0.3583 -3.3088 -2.9504 0.0051 0.3E-13 0.3E-13 -0.9E-13
5 0.3103 -3.3861 -3.0758 0.0116 0.5E-13 0.3E-14 -0.6E-13
LENGTH= 137737/ 163840, CELLS= 3375/ 8192, PA/CL= 10/ 14, CA/PA= 91/ 512
6 L 0.4203 -3.4536 -3.0332 0.0228 -0.4E-13 0.5E-13 -0.2E-13
7 0.4490 -3.5058 -3.0568 0.0386 -0.1E-13 0.7E-15 0.1E-13
8 0.4941 -3.5446 -3.0505 0.0599 -0.3E-13 0.2E-13 0.1E-13
9 0.5183 -3.5706 -3.0523 0.0867 -0.2E-13 -0.9E-14 -0.3E-13
10 0.5328 -3.5845 -3.0517 0.1190 -0.3E-13 -0.3E-13 0.1E-12

10 TIME STEPS, 2 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
0.980000 SEC. CP TIME UPDATING THE LIST ( 0.490000 SEC/UPD. )
3.710000 SEC. CP TIME CALCULATING FORCES ( 0.371000 SEC/STEP )
1.500000 SEC. CP TIME FOR TIME INTEGRATION ( 0.150000 SEC/STEP )
0.230001 SEC. CP TIME FOR OTHER TASKS ( 0.023000 SEC/STEP )
6.420001 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.642000 SEC/STEP )
6.440001 SEC. TOTAL CP TIME

*******************************************************************************
COMPLETE BENCHMARK EXECUTION TIME : 21.550001 CP SECONDS.

MDBNCH: A molecular dynamics benchmark

Summery Data Only:

*******************************************************************************

MD BENCHMARK FOR 16384 PARTICLES, 10 STEPS.
O(N) CELL-METHOD LIST FORMATION EVERY 5 WITH SKIN = 0.50
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH= 140453/ 163840, CELLS= 3375/ 8192, PA/CL= 11/ 14, CA/PA= 88/ 512
1 L 0.0000 -3.0548 -3.0548 0.0000 -0.1E-14 0.3E-14 -0.2E-14
2 0.2426 -3.1375 -2.8949 0.0003 -0.1E-13 0.3E-14 0.1E-13
3 0.0303 -3.1989 -3.1686 0.0011 -0.7E-14 -0.2E-13 -0.1E-13
4 0.3583 -3.3088 -2.9504 0.0051 0.3E-13 0.3E-13 -0.9E-13
5 0.3103 -3.3861 -3.0758 0.0116 0.5E-13 0.3E-14 -0.6E-13
LENGTH= 137737/ 163840, CELLS= 3375/ 8192, PA/CL= 10/ 14, CA/PA= 91/ 512
6 L 0.4203 -3.4536 -3.0332 0.0228 -0.4E-13 0.5E-13 -0.2E-13
7 0.4490 -3.5058 -3.0568 0.0386 -0.1E-13 0.7E-15 0.1E-13
8 0.4941 -3.5446 -3.0505 0.0599 -0.3E-13 0.2E-13 0.1E-13
9 0.5183 -3.5706 -3.0523 0.0867 -0.2E-13 -0.9E-14 -0.3E-13
10 0.5328 -3.5845 -3.0517 0.1190 -0.3E-13 -0.3E-13 0.1E-12

10 TIME STEPS, 2 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
0.650000 SEC. CP TIME UPDATING THE LIST ( 0.325000 SEC/UPD. )
2.409998 SEC. CP TIME CALCULATING FORCES ( 0.241000 SEC/STEP )
0.870000 SEC. CP TIME FOR TIME INTEGRATION ( 0.087000 SEC/STEP )
0.180001 SEC. CP TIME FOR OTHER TASKS ( 0.018000 SEC/STEP )
4.109999 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.411000 SEC/STEP )
4.129999 SEC. TOTAL CP TIME

*******************************************************************************
COMPLETE BENCHMARK EXECUTION TIME : 13.959999 CP SECONDS.

MDBNCH: A molecular dynamics benchmark

Summery Data Only:

MD BENCHMARK FOR 16384 PARTICLES, 10 STEPS.
O(N) CELL-METHOD LIST FORMATION EVERY 5 WITH SKIN = 0.50
PAIR CORRELATION FUNCTION NOT COMPUTED

STEP LP KIN.E POT.E TOT.E DIFFUS PX PY PZ
---- -- ------- ------- ------- -------- -------- -------- --------
LENGTH= 140453/ 163840, CELLS= 3375/ 8192, PA/CL= 11/ 14, CA/PA= 88/ 512
1 L 0.0000 -3.0548 -3.0548 0.0000 -0.1E-14 0.3E-14 -0.2E-14
2 0.2426 -3.1375 -2.8949 0.0003 -0.1E-13 0.3E-14 0.1E-13
3 0.0303 -3.1989 -3.1686 0.0011 -0.7E-14 -0.2E-13 -0.1E-13
4 0.3583 -3.3088 -2.9504 0.0051 0.3E-13 0.3E-13 -0.9E-13
5 0.3103 -3.3861 -3.0758 0.0116 0.5E-13 0.3E-14 -0.6E-13
LENGTH= 137737/ 163840, CELLS= 3375/ 8192, PA/CL= 10/ 14, CA/PA= 91/ 512
6 L 0.4203 -3.4536 -3.0332 0.0228 -0.4E-13 0.5E-13 -0.2E-13
7 0.4490 -3.5058 -3.0568 0.0386 -0.1E-13 0.7E-15 0.1E-13
8 0.4941 -3.5446 -3.0505 0.0599 -0.3E-13 0.2E-13 0.1E-13
9 0.5183 -3.5706 -3.0523 0.0867 -0.2E-13 -0.9E-14 -0.3E-13
10 0.5328 -3.5845 -3.0517 0.1190 -0.3E-13 -0.3E-13 0.1E-12

10 TIME STEPS, 2 LIST UPDATES
0.020000 SEC. CP TIME FOR INITIALIZATION
0.610000 SEC. CP TIME UPDATING THE LIST ( 0.305000 SEC/UPD. )
2.399999 SEC. CP TIME CALCULATING FORCES ( 0.240000 SEC/STEP )
1.129999 SEC. CP TIME FOR TIME INTEGRATION ( 0.113000 SEC/STEP )
0.180003 SEC. CP TIME FOR OTHER TASKS ( 0.018000 SEC/STEP )
4.320001 SEC. CP TIME EXCLUDING INITIALIZATION ( 0.432000 SEC/STEP )
4.340000 SEC. TOTAL CP TIME

*******************************************************************************
COMPLETE BENCHMARK EXECUTION TIME : 13.950001 CP SECONDS.

Byte UNIX Benchmarks for Linux

ASUS P2L97 440LX w/128MB's SDRAM

BusLogic 958

Western Digital WDE4360W

BBBBBB YYY Y TTTTTTT EEEEEEE
BBB B YYY Y TTT EEE
BBB B YYY Y TTT EEE
BBBBBB YYY Y TTT EEEEEEE
BBB B YYY TTT EEE
BBB B YYY TTT EEE
BBBBBB YYY TTT EEEEEEE

BYTEmark (tm) Native Mode Benchmark ver. 2 (10/95)
NUMERIC SORT : Iterations/sec.: 120.13 Index: 3.08
STRING SORT : Iterations/sec.: 10.37 Index: 4.63
BITFIELD : Iterations/sec.: 30300043.03 Index: 5.20
FP EMULATION : Iterations/sec.: 7.04 Index: 3.38
FOURIER : Iterations/sec.: 2453.82 Index: 2.79
ASSIGNMENT : Iterations/sec.: 1.62 Index: 6.15
IDEA : Iterations/sec.: 243.95 Index: 3.73
HUFFMAN : Iterations/sec.: 112.62 Index: 3.12
NEURAL NET : Iterations/sec.: 1.93 Index: 3.10
LU DECOMPOSITION: Iterations/sec.: 78.80 Index: 4.08
...done...
===========OVERALL=============
INTEGER INDEX: 4.052
FLOATING-POINT INDEX: 3.283
(90 MHz Dell Pentium = 1.000)
===============================

• Stream and Stream ftp
• Byte UNIX Benchmarks for Linux
• MDBNCH: A molecular dynamics benchmark
• http://developer.intel.com/design/agpsets/440/index.htm
• XFree86 Benchmarks Survey - a comprehensive and ever-growing database of XBench results, submitted by users of XFree86 from around the globe.
• Benchmark Archive [netlib]
• Benchmarks (SPEC, FAQ's, sources)
• Doom benchmark results - using Doom as benchmark.
• HINT (Hierarchical INTegration) - fair but low-cost comparison of any architecture capable of digital arithmetic.
• lmbench - Tools for Performance Analysis
• PDS: The Performance Database Server
• Perfect Benchmarks - suite of scientific and engineering programs that are representative of applications run on high-performance computers
• STREAM - synthetic benchmark program that measures sustainable memory bandwidth (in MB/s) and the corresponding computation rate for simple vector kernels.
• System Optimization
• Tom's Hardware & Performance Guide
• ZDLabs
• Ziff-Davis Benchmark Operation - Features core benchmark programs used by all Ziff-Davis publications available for downloading. MacBench, NetBench, PC Bench, Server Bench, WinBench and WinStone.
• FAQ - Benchmarks
• Usenet - comp.benchmarks - Discussion of benchmarking techniques and results.
• SPEC:
  • SPEC
  • SPEC [PDS]
  • SPEC CINT/CFP Benchmark Results - large database of results
  • SPEC list
  • FAQ - SPEC
  • FAQ - SPEC Benchmarks
• Usenet - comp.benchmarks - Discussion of benchmarking techniques and results.
• FAQ - Benchmarks
• Benchmarks (SPEC, FAQ's, sources)
• Perfect Benchmarks - suite of scientific and engineering programs that are representative of applications run on high-performance computers
• Network Benchmarks:
  • Biltz/Mukherjee Information Page - mpeg-2, graphics and visualization, www, and other internet traffic datasets and models; congestion control studies; network performance analysis; error recovery protocols, etc.
  • Bradner Benchmark results - Scott Bradner of Harvard's Network Device Test Lab benchmarks commercial routers for metrics including throughput, latency, and packet forwarding rates.
  • Netperf - a benchmark that can be used to measure the performance of many different types of networking.
  • NetPIPE - a network protocol independent performance evaluator.
• Graphics Performance Characterization (GPC) Committee - a nonprofit group of vendors, users and consultants that establishes, maintains and endorses standardized benchmarks for measuring graphics performance as related to specific applications.
• ftp://ftp.cdrom.com/pub/unix-c/benchmarks/
• BAPCo SYSmark/32 for Windows 95 and Windows NT
• Quake Timedemo Benchmark
• Tom's Monster Truck Madness Benchmark
• Wintune 95
• ctcm Mainboard Benchmark
• Winbench 97
• BYTEmark
• General Processor Information
• Bill's Java Stream
• h2bench.zip
• cthdben.zip
• Coretest
• cdbench
• profile.exe

• chkhd

  Other Options
  Computer Systems	CPU	RAM	Motherboard	Hard Drive	Graphics Card	Monitor
  Networking	Software / Books	Scanner	CD-ROM CD-R, CD-RW, DVD	SCSI Controllers	Sound Cards	DAT / Tape Drive
  Modem	Chassis / Power Supplies	Keyboards, Floppies, Cables and Mice	Internet Service Provider (ISP) Packages	Order Queue	Order and Contact Information	Warranties and Returns

  Click here to go back to our home page

  To place and order, e-mail: sales@netexpresslabs.com
  To receive tech support or ask questions, e-mail: tech@netexpresslabs.com
  You may download files from our ftp site at: ftp://ftp.tdl.com/pub/netex

  ---

  Copyright (c) 1996 Net Express All Rights Reserved.